Toshiba Strata DK 280 Installation Manual page 596

Program 47 -
~011 Restriction Exception Office Codes Assigned by Area Codes
~r;;ml?;mn~r;i#~~~..ld!dprr/~j[ 1 1 ) 1 IHold[-
SELECT = Exception Table 01 - 16
Enter the number of the exception table,
01 - 16. A new exception table is needed
for each area code with office codes that
are exceptions to restriction.
AREA CODE =
Enter the area code. See Note 1.
-ISpkr//rjjn~r~-~,-lspkrl~i(llfl~-(Spkr(~~jl(Holdl
--l--l- = DATA =
1
Enter or display office code(s).
See Notes 2 and 3.
2,3or4#
Enter 2 to add to the exception table.
Enter 3 to delete from the exception table.
Enter 4# to display the exception table's
off ice codes.
SELECT = Exception Table 01 - 16 -I
Enter the number of the exception table, 01 - 16 again.
(Copy blank record sheets as required)
Exception Table (01 - 16)
q
Area Code
Exception Table (01 - 16) 0
Area Code
000
I I
Notes:
1. Only one area code may be entered per exception table.
I
DK0426
2. To enter a range of office codes, key in:
Low Office Code&h Or &enotes end of string
3. Several ranges or individual office codes
may
be
Code
entered separating them button.
General Notes:
l
for more information, see the instructions preceding the record sheets.
l
Initialized data assigns no office codes to tables.
l
With DK280 Release 1, 2, and 3, maximum of 16 exception tables, for RCTU C/D, 8 exception tables for
RCTUA, RCTUBA/BB, and RCTUB.
l
For International Call Restriction by country codes, enter 011 for the area code, and Restricted country
code(s) in the office table(s). To fully restrict a 2-digit country code, also Restrict the imaginary 3rd digit of that
country code. For example, to Restrict country code 81, you must Restrict 10 country codes 810 to 819.
10-182
January 1996