Pci Card Carrier; Technical Specifications; Table 5-1 Physical Specifications Of Px-Brick; Table 5-2 Port Specifications Of The Px-Brick - Silicon Graphics Origin 3900 User Manual

5: PX-brick

PCI Card Carrier

Technical Specifications
88
Each PCI card is mounted on a carrier so that you can slide the cards into and out of the
brick. This carrier supports most PCI cards; it can be adjusted to accommodate cards of
different sizes. (To learn how to adjust a carrier, see "Installing or Replacing PCI or PCI-X
Card" on page 202.)
When the PX-brick is shipped, any card that was ordered is installed with a carrier, and
any unoccupied slot is populated with an empty carrier. A carrier must be present in an
unpopulated slot to maintain an even airflow through the brick and to protect against
electromagnetic interference (EMI).
Table 5-1 lists the physical specifications of the PX-brick.
Table 5-1 Physical Specifications of PX-brick
Characteristic Specification
Height 6.64 in. (168.65 mm)
Width 17.5 in. (444.5 mm)
Depth 27.74 in. (704.59 mm)
Weight 60 lb (27.2 kg)
Input power +48 VDC (225 watts)
Table 5-2 shows the port specifications of the PX-brick.
Table 5-2 Port Specifications of the PX-brick
Port Quantity
Power entry One
XIO Two
Connector Type
21-pin Foxcon
Proprietary 100-pin dual row
007-4653-001