Silicon Graphics Origin 3900 User Manual page 171

007-4653-001
To set the rack and slot from the L1 prompt, simply use the brick rack and brick
slot commands. To set the rack and slot on one of the attached bricks (an attached I/O
brick, Cx-brick, or Cx-brick's I/O brick), use the L1 targeting commands nia, nib, iia,
or iib.
001c07-L1> config
:0 - 001c07
:1 - ---i--
001c07-L1> iia brick rack 1
---i--:
brick rack set to 001.
001c07-l1> iia brick slot 23
---i--
brick slot set to 23
001c07-l1> iia reboot_l1
001c07 ERROR: no response from ---i--
001c07-L1> config
:0 - 001c05
:1 - 001i23
001c07-L1>
The number after the ":" indicates the following:
0 = local brick
1 = IIA
2 = IIB
3 = IIC
4 = IID
To obtain a detailed configuration explanation from the L1 perspective, enter the
following:
001c07-L1> config verbose
Identifying Bricks
145