Targeting Single Brick; Figure 8-13 Targeting Single Brick - Silicon Graphics Origin 3900 User Manual

8: System Control

Targeting Single Brick

128
To select a single brick within a rack, see Figure 8-13 and follow these steps:
1. Press the Rack/Slot button.
2. Press the button for the rack (for example, Figure 8-13 shows rack 001 selected).
3. Press the button for the slot (for example, Figure 8-13 shows the brick in slot 031
selected).
Rack/Slot Partition
ALL
CLR << >>
001 002 003 004
101 102
New DEST: r 1 s 31
Apply
Figure 8-13 Targeting Single Brick
The new destination is reflected in the destination field near the bottom of the display
window. For example, Figure 8-13 shows rack 001, slot 031 (r1 s31) as the destination.
Once you have selected the bricks, press the Apply button to set the new destinations.
The home window will then reappear. The new destinations are reflected in the
destination field across the bottom of the home window display.
Slots: ALL
011 015
007
023 027 031
Reset DEST Cancel
CLR
019
035
007-4653-001