Adding Or Removing Disk Drives - Silicon Graphics Origin 3900 User Manual

Adding or Removing Disk Drives

007-4653-001
The IX-brick provides the system boot functions and has one or two low-profile SCSI disk
drives. For instructions on how to install or remove these disk drives, see "Installing or
Replacing Disk Drives in IX-brick" on page 211.
The TP900 is a SCSI-based disk storage module that provides JBOD (just a bunch of
disks) mass storage. Each TP900 can contain up to 8 disk drives. For instructions on how
to install or remove these disk drives, see "Installing or Replacing TP900 Drive Carrier
Module" on page 216.
The D-brick2 is a Fibre Channel-based disk storage enclosure that provides JBOD mass
storage. Each D-brick2 can contain up to 16 disk drives. For instructions on how to install
or remove these disk drives, see "Installing or Replacing D-brick2 Drive Carrier Module"
on page 221.
Installing Optional Components
7