Nmi Confirmation Window - Silicon Graphics Origin 3900 User Manual

NMI Confirmation Window
007-4653-001
If you press the NMI (non-maskable interrupt) button in the home window, the NMI
confirmation window appears, as shown in Figure 8-10.
To initiate the nmi command, press the OK button. To terminate the command, press the
Cancel button. The confirmation window stays visible until the command is successfully
executed. An unsuccessful command results from an L1/L2 error in processing the
command or a time-out while waiting for a response.
SGI L2 Controller, Firmware xx.xx.x
L2-001 S/N Nxxxxxxx [System name]
Power: ON
Press the "OK" button to issue the
"r * s * nmi" command.
OK
Figure 8-10 NMI Confirmation Window
Cancel
L2 Controller
125