Figure 1-8 Slots Section - Silicon Graphics Origin 3900 User Manual

007-4653-001
2. The bricks are selected by their rack and slot/unit number, or by partition. Select
ALL in the display if you want to power on all the bricks in the server. You can also
select the bricks in all the slots of multiple racks, but you cannot select slots for
multiple racks.
If you want to power on individual bricks, select the rack that contains the bricks
that you want to power on from the Rack/Slot segment of the display. A box
appears that lists the slot numbers for all of the bricks in the selected rack (see
Figure 1-8).
Rack/Slot Partition
ALL
CLR << >>
001 002 003 004
101 102
New DEST: r 1 s 7, 15, 27, 35
Apply
Figure 1-8 Slots Section
3. Select the slot number of each brick that you want to power on. (Figure 1-8 shows
slots 007, 015, 027, and 035 selected). The New DEST: field lists your selections.
After you complete your selections, select Apply.
Slots: ALL
011 015
007
023 027 031
Reset DEST Cancel
Powering Server On and Off
CLR
019
035
15