Console Mode - Silicon Graphics Origin 3900 User Manual

8: System Control

Console Mode

138
In console mode, all output from the system is visible and all input is directed to the
system.
To enter console mode from L2 mode, press Ctrl+D at the L2 prompt and observe the
response:
L2> Ctrl+D
entering system console mode (001c07 console0),
<CTRL_T> to escape to L2
.
<system output appears here>
.
To return to L2 mode from console mode, press Ctrl+T:
Ctrl+T
escaping to L2 system controller
L2>
At this point, you can enter any L2 or L1 command. When the command completes, the
L2 returns to console mode:
Re-entering system console mode (001c07 console0),
<CTRL_T> to escape to L2
To permanently engage the L2 mode, press Ctrl+T and then enter the l2 command:
Ctrl+T
escaping to L2 system controller
L2> l2
L2 command processor engaged, <CTRL_D> for console mode.
L2>
007-4653-001