Silicon Graphics Origin 3900 User Manual page 46

1: Operation Procedures
20
7. After you have selected the destination of the bricks you want to power on, select
Power UP on the home window, and the power up confirmation window, shown in
Figure 1-13, appears. This window indicates which bricks will receive the Power UP
command. In this example, the window indicates that all slots (bricks) in all racks (r
* s*) will be powered on. If you select OK, the power-up operation is confirmed, and
the home window appears. Selecting Cancel stops the power-on operation, and the
home window appears.
SGI L2 Controller, Firmware xx.xx.x
L2-001 S/N Lxxxxxxx [firestorm]
Power: OFF
Press the "OK" button to issue the
"r * s * power up" command.
OK
Figure 1-13 Power Up Confirmation Window
Cancel
007-4653-001