Monitoring Server - Silicon Graphics Origin 3900 User Manual

Monitoring Server

007-4653-001
You can monitor your SGI Origin 3900 server from the following sources:
• L1 controller display - All bricks (except the TP900 and D-brick2) contain an L1
controller display that displays information about the brick. For example, you can
see if the fans on a particular brick are operating properly.
• If your server has a system console, you can view the status and error messages
generated by the L1 and L2 controllers in your server. You can also use the system
console to input L1 and L2 commands to manage and monitor your server.
• If your server has SGIconsole, you can view the status and error messages
generated by the L1 and L2 controllers in your server and you can use various
software tools, such as VACM, Console Manager, and PCP, to manage and monitor
your server. See the SGIconsole Start Here guide for descriptions of these tools and
for references to other documents with information about these tools.
Monitoring Server
35