Configuring The General Media Settings; Figure 3-52: General Media Settings Page - AudioCodes Mediant 1000 User Manual

SIP User's Manual
Parameter
Answer Detector Redirection
[AnswerDetectorRedirection]
Answer Detector Sensitivity
[AnswerDetectorSensitivity]
Enable Energy Detector
[EnableEnergyDetector]
Energy Detector Quality Factor
[EnergyDetectorQualityFactor]
Energy Detector Threshold
[EnergyDetectorThreshold]
Enable Pattern Detector
[EnablePatternDetector]
3.4.2.5

Configuring the General Media Settings

The 'General Media Settings' page allows you to configure various media parameters.
To configure general media parameters, take these 4 steps:
1. Open the 'General Media Settings' page (Configuration tab > Media Settings menu
> General Media Settings page item).
2. Configure the general media parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
Version 5.4
N/A.
Determines the Answer Detector sensitivity.
The range is 0 (most sensitive) to 2 (least sensitive). The default is
0.
N/A
N/A
N/A
Enables or disables the activation of the Pattern Detector (PD).
Valid options include:
[0] Disable = Disable (default)
[1] Enable = Enable

Figure 3-52: General Media Settings Page

93
3. Web-Based Management
Description
May 2008