AudioCodes Mediant 1000 User Manual page 271

SIP User's Manual
3.5.2.2.1 Loading via BootP/TFTP
The procedure below describes how to load a Software Upgrade Key to the device using
AudioCodes' BootP/TFTP Server utility (for a detailed description on the BootP utility, refer
to the Product Reference Manual).
To load a Software Upgrade Key file using BootP/TFTP, take these
6 steps:
1. Place the Software Upgrade Key file (typically, a *.txt file) in the same folder in which
the device's cmp file is located.
2. Start the BootP/TFTP Server utility.
3. From the Services menu, choose Clients; the 'Client Configuration' screen is
displayed.
4. From the 'INI File' drop-down list, select the Software Upgrade Key file. Note that the
device's cmp file must be specified in the 'Boot File' field.
5. Configure the initial BootP/TFTP parameters as required, and then click OK.
6. Reset the device; the cmp and Software Upgrade Key files are loaded to the device.
Note:
Version 5.4
To load the Software Upgrade Key using BootP/TFTP, the extension name of
the key file must be *.ini.
271
3. Web-Based Management
May 2008