Configuring The General Media Settings; Configuring The Hook-Flash Settings; Figure 3-49: General Media Settings Page; Figure 3-50: Hook-Flash Settings Page - AudioCodes Mediant 600 User Manual

SIP User's Manual
3.3.2.5

Configuring the General Media Settings

The 'General Media Settings' page allows you to configure various media parameters. For a
detailed description of the parameters appearing on this page, refer to ''Configuration
Parameters Reference'' on page 243.
To configure general media parameters:
1. Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
General Media Settings page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 193.
3.3.2.6

Configuring the Hook-Flash Settings

The 'Hook-Flash Settings' page allows you to configure hook-flash parameters. For a
detailed description of the parameters appearing on this page, refer to ''Configuration
Parameters Reference'' on page 243.
To configure the Hook-Flash parameters:
1. Open the 'Hook-Flash Settings' page (Configuration tab > Media Settings menu >
Hook-Flash Settings page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 193.
Version 5.8
Figure 3-52: General Media Settings Page
Figure 3-53: Hook-Flash Settings Page
79
3. Web-Based Management
September 2009