AudioCodes Mediant 1000 User Manual page 371

SIP User's Manual
ini File Parameter
SourceNumberMapTel2IP This ini file table parameter manipulates the source phone number for
Version 5.4
The Source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all addresses
between 10.8.8.10 and 10.8.8.99.
The Source IP address can include the asterisk ('*') wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all the addresses between 10.8.8.0 and 10.8.8.255.
To configure manipulation of destination numbers for IP-to-Tel calls
using the Web interface (i.e., in the 'Destination Phone Number
Manipulation Table for IP-to-Tel Calls' table), refer to ''Configuring
the Number Manipulation Tables'' on page 190).
For a description on using ini file table parameters, refer to ''Structure
of ini File Table Parameters'' on page 293.
Tel-to-IP calls. The format of this parameter is as follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_DestinationPrefix,
SourceNumberMapTel2Ip_SourcePrefix,
SourceNumberMapTel2Ip_SourceAddress,
SourceNumberMapTel2Ip_NumberType,
SourceNumberMapTel2Ip_NumberPlan,
SourceNumberMapTel2Ip_RemoveFromLeft,
SourceNumberMapTel2Ip_RemoveFromRight,
SourceNumberMapTel2Ip_LeaveFromRight,
SourceNumberMapTel2Ip_Prefix2Add,
SourceNumberMapTel2Ip_Suffix2Add,
SourceNumberMapTel2Ip_IsPresentationRestricted;
[\SourceNumberMapTel2Ip]
Where,
DestinationPrefix = Destination number prefix.
SourcePrefix = Source number prefix.
SourceAddress = Source IP address (obtained from the Request-
URI in the INVITE message).
NumberType = Number Type used in RPID header.
NumberPlan = Number Plan used in RPID header.
RemoveFromLeft = Number of stripped digits from the left.
RemoveFromRight = Number of stripped digits from the right.
LeaveFromRight = Number of remaining digits from the right.
Prefix2Add = String to add as prefix.
Suffix2Add = String to add as suffix.
IsPresentationRestricted = Calling number presentation (0 to allow
presentation; 1 to restrict presentation).
For example:
[SourceNumberMapTel2Ip]
SourceNumberMapTel2Ip 0 = 22,03,$$,0,0,$$,2,$$,667,$$,0;
SourceNumberMapTel2Ip 0 = 10,10,*,255,255,3,0,5,100,$$,255;
[\SourceNumberMapTel2Ip]
371
4. ini File Configuration
Description
May 2008