Configuring The General Media Settings; Figure 3-45: General Media Settings Page; Table 3-16: Media Settings Parameters - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
3.4.2.4

Configuring the General Media Settings

The 'General Media Settings' page allows you to configure various media parameters.
To configure general media parameters, take these 4 steps:
1. Open the 'General Media Settings' page (Configuration tab > Media Settings menu
> General Media Settings page item).
2. Configure the general media parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 207.
Parameter
Max Echo Canceller Length
[MaxEchoCancellerLengt
h]
Enable Continuity Tones
Version 5.4

Figure 3-45: General Media Settings Page

Table 3-16: Media Settings Parameters

Maximum Echo Canceler Length (in msec):
[0] Default = based on various internal device settings to attain
maximum channel capacity (default)
[1] = 15 msec
[2] = 20 msec
[3] = 25 msec
[4] = 30 msec
[5] = 35 msec
[6] = 40 msec
[4] = 32 msec
Notes:
Reset the device after modifying this parameter.
It isn't necessary to configure the parameter EchoCancellerLength
as it automatically acquires its value from this parameter.
N/A.
77
3. Web-Based Management
Description
May 2008