AudioCodes Mediant 1000 User Manual page 376

ini File Parameter
Alternative Routing Parameters
RedundantRoutingMode
AltRoutingTel2IPEnable
AltRoutingTel2IPMode
AltRoutingTel2IPConnMet
hod
IPConnQoSMaxAllowedPL For a description of this parameter, refer to ''Routing General
IPConnQoSMaxAllowedDe
lay
Phone-Context Parameters
AddPhoneContextAsPrefi
x
PhoneContext
SIP User's Manual
Determines the type of redundant routing mechanism to implement
when a call can't be completed using the main route.
[0] = No redundant routing is used. If the call can't be completed
using the main route (using the active Proxy or the first matching rule
in the internal routing table), the call is disconnected.
[1] = Internal routing table is used to locate a redundant route
(default).
[2] = Proxy list is used to locate a redundant route.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 198.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 198.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 198.
Parameters'' on page 198.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 198.
For a description of this parameter, refer to ''Mapping NPI/TON to
Phone-Context'' on page 195.
This ini file table parameter defines the Phone Context table. The format
for this parameter is as follows:
[PhoneContext]
FORMAT PhoneContext_Index = PhoneContext_Npi,
PhoneContext_Ton, PhoneContext_Context;
[\PhoneContext]
Where,
Npi = Number Plan.
Ton = Type of Number.
Context = Phone-Context value.
When a call is received from the ISDN/Tel, the NPI and TON are
compared to the table, and the Phone-Context value is used in the
outgoing SIP INVITE message. The same mapping occurs when an
INVITE with a Phone-Context attribute is received. The Phone-Context
parameter appears in the standard SIP headers where a phone number
is used (Request-URI, To, From, Diversion).
For example:
[PhoneContext]
PhoneContext 0 = 0,0,unknown.com
PhoneContext 1 = 1,1,host.com
PhoneContext 2 = 9,1,na.e164.host.com
[\PhoneContext]
Notes:
This parameter can include up to 20 indices.
376
Mediant 1000 & Mediant 600
Description
Document #: LTRT-83303