AudioCodes Mediant 1000 User Manual page 269

SIP User's Manual
The procedure below describes how to load a Software Upgrade Key to the device using
the Web interface.
To load a Software Upgrade Key, take these 6 steps:
1. Open the 'Software Upgrade Key Status' page (Management tab > Software Update
menu > Software Update Key page item).
2. Backup your current Software Upgrade Key as a precaution so that you can re-load
this backup key to restore the device's original capabilities if the new key doesn't
comply with your requirements:
a. In the 'Current Key' field, copy the string of text and paste it in any standard text
file.
b. Save the text file to a folder on your PC with a name of your choosing.
3. Open the new Software Upgrade Key file and ensure that the first line displays
'[LicenseKeys]' and that it contains one or more lines in the following format:
S/N<serial number> = <long Software Upgrade Key>
For example: S/N370604 = jCx6r5tovCIKaBBbhPtT53Yj...
One S/N must match the serial number of your device. The device's serial number can
be viewed in the 'Device Information' page (refer to ''Device Information'' on page
280).
4. Follow one of the following procedures, depending on whether you are loading a
single or multiple key S/N lines:
•
Single key S/N line:
a.
b.
c.
Version 5.4
Open the Software Upgrade Key text file (using, for example, Microsoft®
Notepad).
Select and copy the key string of the device's S/N and paste it into the field
'Add a Software Upgrade Key'.
Click the Add Key button.
269
3. Web-Based Management
May 2008