Gateway Statistics; Call Counters; Figure 3-124: Active Alarms - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To view the list of alarms, take this step:
Open the 'Active Alarms' page (Status & Diagnostics tab > Status & Diagnostics
menu > Active Alarms page item).
3.6.2

Gateway Statistics

The 'Gateway Statistics' page allows you to monitor real-time activity such as IP
connectivity information, call details and call statistics, including the number of call
attempts, failed calls, fax calls, etc. This menu includes the following page items:
IP to Tel Calls Count and Tel to IP Calls Count (refer to ''Call Counters'' on page 283)
Call Routing Status (refer to ''Call Routing Status'' on page 286)
SAS/SBC Registered Users (refer to SAS/SBC Registered Users on page 287)
IP Connectivity (refer to ''IP Connectivity'' on page 289)
Note:
3.6.2.1

Call Counters

The 'IP to Tel Calls Count' and 'Tel to IP Calls Count' pages provide you with statistical
information on incoming (IP-to-Tel) and outgoing (Tel-to-IP) calls. The statistical
information is updated according to the release reason that is received after a call is
terminated (during the same time as the end-of-call Call Detail Record or CDR message is
sent). The release reason can be viewed in the 'Termination Reason' field in the CDR
message.
You can reset the statistical data displayed on the page (i.e., refresh the display), by
clicking the Reset Counters button located on the page.
Version 5.4
Figure 3-124: Active Alarms Page
The 'Gateway Statistics' pages don't refresh automatically. To view updated
information, re-access the required page.
283
3. Web-Based Management
May 2008