Number Manipulation And Routing Parameters; Table 4-13: Number Manipulation And Routing Parameters - AudioCodes Mediant 1000 User Manual

ini File Parameter
BellcoreVMWITypeOne
Standard

4.4.13 Number Manipulation and Routing Parameters

Table 4-13: Number Manipulation and Routing Parameters

ini File Parameter
TrunkGroup
SIP User's Manual
Selects the Bellcore VMWI sub-standard.
[0] = Between rings (default).
[1] = Not ring related.
This ini file table parameter defines the device's endpoints/Trunks.
Alternatively, you can use the Web interface (refer to Configuring the
Trunk Group Table on page 226). The format of this parameter is shown
below:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_LastTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_Module;
[\TrunkGroup]
Where,
TrunkGroupNum = Trunk Group ID (1 to 99)
FirstTrunkId = Starting physical trunk number, where 0 is the first
trunk
FirstBChannel = Starting B-channel (from 1)
LastBChannel = Ending B-channel (up to 31)
FirstPhoneNumber = Phone number associated with the first channel
(optional)
ProfileId = Optional Tel Profile ID (1 to 9) applied to the group of
channels
LastTrunkId = Ending physical trunk number
Module = Module number
For example:
[TrunkGroup]
TrunkGroup 1 = 0, 0, 0, 1, 31 ,401, 0;
TrunkGroup 1 = 0, 0, 0, 1, 31, $$, 1;
TrunkGroup 2 = 1, 2, 2, 1, 24, 3000;
TrunkGroup 1 = 0, 0, 3, *, 1000;
TrunkGroup 3 = 2, 0, 3, 1, 20, 101, 1;
module 1)
TrunkGroup 1 = 1, 0, 3, 1, 2 ,208, 0 ,1; (4 BRI ports; tel. no 208,
module 1)
[\TrunkGroup]
Notes:
This parameter can appear up to four times per module.
To represent all B-channels, use an asterisk ('*').
For a description on ini file table parameters, refer to ''Structure of ini
File Table Parameters'' on page 293.
364
Mediant 1000 & Mediant 600
Description
Description
(E1 span)
(T1 span)
(4 E1 spans; all B-channels)
(4 E1 spans; 20 B-channels;
Document #: LTRT-83303