12.4
Installing the iPMX Module
The iPMX module is installed on the rear panel of the Mediant 1000, as described in the
following procedure:
To install the iPMX module, take these 7 steps:
1.
Place the Mediant 1000 so that the rear panel is facing you, as shown in the figure
below.
2.
Remove the black metal cover plates in the first and second slots located on the right
side of the power connection, as shown in the figure below.
Figure 12-7: Mediant 1000 with Cover Plates Removed
SIP User's Manual
Figure 12-6: Mediant 1000 Rear Panel
504
Mediant 1000 & Mediant 600
Document #: LTRT-83303