Configuring The General Media Settings; Configuring The Dsp Templates; Figure 3-40: General Media Settings Page; Figure 3-41: Dsp Templates Page - AudioCodes Mediant 3000 User Manual
Hide thumbs
Also See for Mediant 3000:
- User manual (1070 pages) ,
- Installation manual (90 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
3.3.2.5
Configuring the General Media Settings
The 'General Media Settings' page allows you to configure various media parameters. For a
detailed description of the parameters appearing on this page, refer to ''Configuration
Parameters Reference'' on page 265.
To configure general media parameters:
1.
Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
General Media Settings page item).
2.
Configure the parameters as required.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
3.3.2.6
Configuring the DSP Templates
The 'DSP Templates' page allows you to load up to two DSP templates to the device. In
addition, you can define the percentage of DSP resources allocated per DSP template.
To select DSP templates:
1.
Open the 'DSP Templates' page (Configuration tab > Media Settings menu > DSP
Templates page item).
2.
Select an index row by clicking the corresponding 'Index' radio button.
3.
Click Edit, and then in the 'DSP Template Number' field, enter the desired DSP
template number.
4.
Click Apply to save your settings.
5.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 190.
SIP User's Manual
Figure 3-40: General Media Settings Page
Figure 3-41: DSP Templates Page
78
Mediant 3000
Document #: LTRT-89707
Advertisement
Table of Contents
Troubleshooting
