Configuring The General Security Settings; Figure 3-62: General Security Settings - AudioCodes Mediant 1000 User Manual

SIP User's Manual
3.4.4.5

Configuring the General Security Settings

The 'General Security Settings' page is used to configure various security features.
To configure the general security parameters, take these 4 steps:
1. Open the 'General Security Settings' page (Configuration tab > Security Settings
menu > General Security Settings page item).
2. Configure the General Security parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
Version 5.4
Figure 3-62: General Security Settings Page
123
3. Web-Based Management
May 2008