AudioCodes Mediant 1000 User Manual page 539

SIP User's Manual
4. Locate the line 'prompt <flag>' (usually appears as 'prompt 1') and change it to 'prompt
0'.
5. Locate the line 'timeout <tenth_of_secs>' (usually appears as 'timeout 600') and
change it to 'timeout 0'.
Note:
The isolinux.cfg file should now look like the following:
serial 0 115200
DEFAULT /install/vmlinuz
APPEND
console=ttyS0,115200 ramdisk_size=10240 root=/dev/rd/0
devfs=mount,dall rw --
LABEL linux
kernel /install/vmlinuz
...
DISPLAY isolinux.txt
TIMEOUT 0
PROMPT 0
F1 f1.txt
F2 f2.txt
F3 f3.txt
F4 f4.txt
F5 f5.txt
F6 f6.txt
F7 f7.txt
F8 f8.txt
F9 f9.txt
F0 f10.txt
Note:
6. Save the changes to the isolinux.cfg file, and then close the text editor.
7. Open the 'Partner Install' folder and with the ISO editing utility, open the boot.iso file.
8. Click the 'isolinux' directory; the folder's contents appear.
Version 5.4
14. Installing Linux™ Operating System on the OSN Server
If the timeout line does not exist, do not add it.
vga=normal initrd=/install/initrd.gz text
If the timeout line does not exist, do not add it.
1.If you want to install 'kernel 2.6' rather than the 'default 2.4 version', then:
a) Take the options from 'kernel' and 'append' lines under the label called
'LABEL linux26'.
b) Replace the options of 'DEFAULT' and 'APPEND' lines (at the start of the
file).
c) Apply the changes from Step 8..
539 May 2008