AudioCodes Mediant 1000 User Manual page 237

Voice-over-ip (voip) sip media gateways
Hide thumbs Also See for Mediant 1000:
Table of Contents

Advertisement

SIP User's Manual
Parameter
Send Screening Indicator to IP
[ScreeningInd2IP]
Send Screening Indicator to ISDN
[ScreeningInd2ISDN]
Add IE in SETUP
[AddIEinSetup]
Trunk Groups to Send IE
[SendIEonTG]
Enable User-to-User IE for Tel to
IP
[EnableUUITel2IP]
Version 5.4
Overrides the calling party's number (CPN) screening indication in
the received ISDN SETUP message for Tel-to-IP calls.
[-1] Not Configured = not configured (interworking from ISDN to
IP) or set to 0 for CAS (default).
[0] User Provided = CPN set by user, but not screened
(verified).
[1] User Passed = CPN set by user, verified and passed.
[2] User Failed = CPN set by user, and verification failed.
[3] Network Provided = CPN set by network.
Note: Applicable only if Remote Party ID (RPID) header is
enabled.
Overrides the screening indicator of the calling party's number for
IP-to-Tel ISDN calls.
[-1] Not Configured = Not configured (interworking from IP to
ISDN) (default).
[0] User Provided = user provided, not screened.
[1] User Passed = user provided, verified and passed.
[2] User Failed = user provided, verified and failed.
[3] Network Provided = network provided.
Adds an optional Information Element (IE) data (in hex format) to
ISDN SETUP messages. For example, to add IE
'0x20,0x02,0x00,0xe1', enter the following value for this parameter:
'200200e1'.
Note: This IE is sent from the Trunk Group IDs defined by the
parameter SendIEonTG.
Defines Trunk Group IDs (up to 50 characters) from where the
optional ISDN IE defined by the parameter AddIEinSetup is sent.
For example: '1,2,4,10,12,6'.
Enables ISDN PRI-to-SIP interworking.
[0] Disable = Disabled (default).
[1] Enable = Enable transfer of User-to-User Information
Element (UUIE) from PRI to SIP.
The device supports the following ISDN PRI-to-SIP interworking:
SETUP to SIP INVITE, CONNECT to SIP 200 OK, USER
INFORMATION to SIP INFO, ALERT to SIP 18x response, and
DISCONNECT to SIP BYE response messages.
Note: The interworking of User-to-User IE to SIP INFO is
supported only on the 4ESS PRI variant.
237
3. Web-Based Management
Description
May 2008

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 600

Table of Contents