Table 3-41: Number Manipulation Parameters Description - AudioCodes Mediant 1000 User Manual

•
When the source number is 1234510012001, it is changed to 20018.
•
When the source number is 3122, it is changed to 2312.
2. From the 'Table Index' drop-down list, select the range of entries that you want to edit
(up to 20 entries can be configured for Source Number Manipulation and 50 entries for
Destination Number Manipulation).
3. Configure the Number Manipulation table according to the table below.
4. Click the Submit button to save your changes.
5. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
Notes:

Table 3-41: Number Manipulation Parameters Description

Parameter
Destination Prefix
Source Prefix
Source IP
SIP User's Manual
•
The manipulation rules are executed in the following order:
1. Number of stripped digits.
2. Number of digits to leave.
3. Prefix / suffix to add.
•
The manipulation rules are applied to any incoming call whose:
1. Destination number prefix matches the prefix defined in the
'Destination Prefix' field.
2. Source number prefix matches the prefix defined in the 'Source Prefix'
field.
3. Source IP address matches the IP address defined in the 'Source IP'
field (if applicable).
The number manipulation can be performed using a combination of each
of the above criteria, or using each criterion independently.
•
For available notations that represent multiple numbers, refer to ''Dialing
Plan Notation'' on page 194.
Destination (called) telephone number prefix. An asterisk (*) represents
any number.
Source (caller) telephone number prefix. An asterisk (*) represents any
number.
Source IP address of the caller (obtained from the Contact header in the
INVITE message).
Notes:
This parameter is only applicable to the Number Manipulation tables
for IP-to-Tel calls.
The source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all IP addresses
between 10.8.8.10 to 10.8.8.99.
The source IP address can include the asterisk (*) wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all IP addresses between 10.8.8.0 and 10.8.8.255.
Description
192
Mediant 1000 & Mediant 600
Document #: LTRT-83303