3.4.2.3
Configuring the RTP / RTCP Settings
The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters.
To configure the RTP / RTCP parameters, take these 4 steps:
1.
Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings page item).
2.
Configure the RTP / RTCP parameters according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
SIP User's Manual
Figure 3-50: RTP/RTCP Settings Page
88
Mediant 1000 & Mediant 600
Document #: LTRT-83303