AudioCodes Mediant 1000 User Manual page 77

SIP User's Manual
Column Name
[ini File Parameter Name]
Gateway IP Address
[RoutingTableGatewaysColum
n]
TTL
Hop Count
[RoutingTableHopsCountColu
mn]
Interface
[RoutingTableInterfacesColum
n]
Version 5.4
The IP address of the router (next hop) to which the packets are
sent if their destination matches the rules in the adjacent columns.
Note: The Gateway address must be in the same subnet on which
the address is configured on the 'Multiple Interface Table' page
(refer to ''Configuring the Multiple Interface Table'' on page 68).
A read-only field that indicates the time period for which the specific
routing rule is valid. The lifetime of a static route is infinite.
The maximum number of allowed routers (hops) between the
device and destination.
Note: This parameter must be set to 1 for the routing rule to be
valid. Routing entries with Hop Count equals 0 are local routes set
automatically by the device.
Specifies the interface (network type) to which the routing rule is
applied.
[0] = OAMP (default).
[1] = Media.
[2] = Control.
For detailed information on the network types, refer to ''Configuring
the Multiple Interface Table'' on page 68.
77
3. Web-Based Management
Description
May 2008