AudioCodes Mediant 1000 User Manual page 105

SIP User's Manual
ini File Field Name
Web Parameter Name
Incoming Calls Behavior
[ISDNInCallsBehavior]
General Call Control
Behavior
[ISDNGeneralCCBehavior
]
Version 5.4
Valid Range and Description
indicates an unused channel ID, preferred only.
[572] USE A LAW = When set, the device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends the default
G.711-Law in outgoing voice calls. Applicable to E10 variant.
[1024] = Numbering plan / type for T1 IP-to-Tel calling numbers are
defined according to the manipulation tables or according to the RPID
header (default). Otherwise, the plan / type for T1 calls are set
according to the length of the calling number.
[2048] = When this bit is set, the device accepts any IA5 character in
the called_nb and calling_nb strings and sends any IA5 character in
the called_nb, and is not restricted to extended digits only (i.e., 0-
9,*,#).
[16384] DLCI REVERSED OPTION = Behavior bit used in the IUA
interface groups to indicate that the reversed format of the DLCI field
must be used.
Note: When using the ini file to configure the device to support several
ISDNOutCallsBehavior features, add the individual feature values. For
example, to support both [2] and [16] features, set
ISDNOutCallsBehavior = 18 (i.e., 2 + 16).
This is the bit-field used to determine several behavior options that
influence how the ISDN Stack INCOMING calls behave. To select the
options, click the arrow button, and then for each required option, select
1 to enable. The default is 0 (i.e., disable).
[32] DATA CONN RS = Sends a CONNECT (answer) message on
NOT incoming Tel calls.
[64] VOICE CONN RS = device sends a CONNECT (answer)
message on incoming Tel calls.
[2048] CHAN ID IN FIRST RS = Sends Channel ID in the first
response to an incoming Q.931 Call Setup message. Otherwise, the
Channel ID is sent only if the device requires changing the proposed
Channel ID (default).
[8192] CHAN ID IN CALL PROC = Sends Channel ID in a Q.931 Call
Proceeding message.
[65536] PROGR IND IN SETUP ACK = Includes Progress Indicator
(PI=8) in Setup ACK message if an empty called number is received
in an incoming SETUP message. Applicable to overlap dialing mode.
The parameter also directs the device to play a dial tone (for
TimeForDialTone), until the next called number digits are received.
[262144] = NI-2 second redirect number. You can select and use (in
INVITE messages) the NI-2 second redirect number if two redirect
numbers are received in Q.931 Setup for incoming Tel-to-IP calls.
Note: When using the ini file to configure the device to support several
ISDNInCallsBehavior features, add the individual feature values. For
example, to support both [2048] and [65536] features, set
ISDNInCallsBehavior = 67584 (i.e., 2048 + 65536).
Bit-field used to determine several general CC behavior options. To
select the options, click the arrow button, and then for each required
option, select 1 to enable. The default is 0 (i.e., disable).
[2] = data calls with interworking indication use 64 kbps B-channels
(physical only).
105
3. Web-Based Management
May 2008