Configuring The Endpoint Settings; Table 3-48: Description Of Parameters Unique To Ip Profile - AudioCodes Mediant 1000 User Manual

5. Configure the IP Profile's parameters according to your requirements. For detailed
information on each parameter, refer to the description on the page in which it is
configured as an individual parameter. Parameters that are unique to IP Profile are
described in the table below.
6. From the 'Coder Group' drop-down list, select the coder group you want to assign to
the Profile. You can select the device's default coders (refer to ''Coders'' on page 157)
or one of the coder groups you defined in the 'Coder Group Settings' page (refer to
''Coder Group Settings'' on page 212).
7. Repeat steps 2 through 6 for the next IP Profiles (optional).
8. Click the Submit button to save your changes.
9. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.

Table 3-48: Description of Parameters Unique to IP Profile

Parameter
Number of Calls Limit
3.4.5.6

Configuring the Endpoint Settings

The Endpoint Settings submenu allows you to configure port-specific parameters. This
submenu includes the following page items:
Authentication (refer to ''Authentication'' on page 219)
Automatic Dialing (refer to ''Automatic Dialing'' on page 220)
Caller Display Information (refer to ''Caller Display Information'' on page 221)
Call Forward (refer to ''Call Forward'' on page 222)
Caller ID Permissions (refer to ''Caller ID Permissions'' on page 224)
Call Waiting (refer to ''Call Waiting'' on page 225)
Note:
SIP User's Manual
Maximum number of concurrent calls. If the profile is set to some limit, the
device maintains the number of concurrent calls (incoming and outgoing)
pertaining to the specific profile. A limit value of '-1' indicates that there is
no limitation on calls for that specific profile (default). A limit value of '0'
indicates that all calls are rejected. When the number of concurrent calls is
equal to the limit, the device rejects any new incoming and outgoing calls
belonging to that profile.
The Endpoint Settings menu is applicable only to Mediant 1000 analog
modules.
Description
218
Mediant 1000 & Mediant 600
Document #: LTRT-83303