Call Routing Status; Figure 3-126: Call Routing Status; Table 3-67: Call Routing Status Parameters - AudioCodes Mediant 1000 User Manual

3.6.2.2

Call Routing Status

The 'Call Routing Status' page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.
To view the call routing status, take this step:
Open the 'Call Routing Status' page (Status & Diagnostics tab > Gateway Statistics
menu > Calls Routing Status page item).
Parameter
Proxy = Proxy server is used to route calls.
Current
Call-Routing
Routing Table preferred to Proxy = The 'Tel to IP Routing' table takes
Method
precedence over a Proxy for routing calls ('Prefer Routing Table' parameter is set
to 'Yes' as described in ''Proxy & Registration Parameters'' on page 146).
Not Used = Proxy server isn't defined.
Current
Proxy
IP address and FQDN (if exists) of the Proxy server with which the device
currently operates.
N/A = Proxy server isn't defined.
Current
Proxy State
OK = Communication with the Proxy server is in order.
Fail = No response from any of the defined Proxies.
SIP User's Manual
Figure 3-126: Call Routing Status Page

Table 3-67: Call Routing Status Parameters

286
Mediant 1000 & Mediant 600
Description
Document #: LTRT-83303