AudioCodes Mediant 1000 User Manual page 104

ini File Field Name
Web Parameter Name
Outgoing Calls Behavior
[ISDNOutCallsBehavior]
SIP User's Manual
Valid Range and Description
the D-channel.
Note: Applicable to 4/5ESS, DMS and NI-2 variants.
[32768] ACCEPT MU LAW =Mu-Law is also accepted in ETSI.
[65536] EXPLICIT PRES SCREENING = The calling party number
(octet 3a) is always present even when presentation and screening
are at their default.
Note: Applicable only to ETSI, NI-2, and 5ESS.
[131072] STATUS INCOMPATIBLE STATE = Clears the call on
receipt of Q.931 Status with incompatible state. Otherwise, no action
is taken (default).
[262144] STATUS ERROR CAUSE = Clear call on receipt of
STATUS according to cause value.
[524288] ACCEPT A LAW =A-Law is also accepted in 5ESS.
[2097152] RESTART INDICATION
=acEV_PSTN_RESTART_CONFIRM is generated on receipt of a
RESTART message.
[4194304] FORCED RESTART =On data link (re)initialization, send
RESTART if there is no call.
[1073741824] NS QSI ENCODE INTEGER = If this bit is set,
INTEGER ASN.1 type is used in operator coding (compliant to new
ECMA standards); otherwise, OBJECT IDENTIFIER ASN.1 type is
used.
Note: Only applicable only to QSIG.
[2147483648] NS 5ESS NATIONAL = Use the National mode of
AT&T 5ESS for B-channel maintenance.
Note: To configure the device to support several ISDNIBehavior
features, add the individual feature values. For example, to support both
[512] and [2048] features, set ISDNIBehavior = 2560 (i.e., 512 + 2048).
This parameter determines several behaviour options that influence the
behaviour of the ISDN Stack outgoing calls. To select options, click the
arrow button, and then for each required option, select 1 to enable. The
default is 0 (i.e., disable).
[2] USER SENDING COMPLETE =When this bit is set, the device
doesn't automatically generate the information element Sending-
Complete IE in the SETUP message. If this bit is not set, the device
generates it automatically in the SETUP message only.
[16] USE MU LAW = When set, the device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends G.711-A-Law
in outgoing voice calls. (Applicable only to the Korean variant.)
[128] DIAL WITH KEYPAD = When enabled, the device uses the
Keypad IE to store the called number digits instead of the
CALLED_NB IE. (Only applicable to the KOR variant (Korean
network). Useful for Korean switches that don't accept the
CALLED_NB IE.)
[256] STORE CHAN ID IN SETUP =When this bit is set, the device
forces the sending of a Channel-Id IE in an outgoing SETUP message
even if it's not required by the standard (i.e., optional), and no
Channel-Id has been specified in the establishment request. This is
useful for improving required compatibility with switches. On BRI
lines, the Channel-Id IE indicates 'any channel'. On PRI lines, it
104
Mediant 1000 & Mediant 600
Document #: LTRT-83303