AudioCodes Mediant 1000 User Manual page 325

SIP User's Manual
ini File Parameter
UseSIPTgrp
EnableGRUU
UserAgentDisplayInfo
SIPSDPSessionOwner
RetryAfterTime
EnablePAssociatedURIHe
ader
EnableContactRestriction For a description of this parameter, refer to ''SIP General Parameters''
ReRegisterOnConnection
Failure
SourceNumberPreference Determines the SIP header used to determine the Source Number in
EnableRTCPAttribute
Version 5.4
Notes:
This table parameter can include up to 6 indices (0-5).
For configuring the Proxy Sets, refer to the ini file parameter ProxyIP.
For configuring the Proxy Set ID table using the Web interface, refer
to ''Proxy Sets Table'' on page 153.
For an explanation on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 293.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
on page 134.
Enables the device to perform SIP Re-Registration upon TCP/TLS
connection failure.
[0] Disable (default).
[1] Enable.
incoming INVITE messages.
"" (empty string) = Use device's internal logic for header preference
(default).
"FROM" = Use the Source Number received in the From header.
The valid range is a string of up to 10 characters. The default is an
empty string.
Enables or disables the use of the 'rtcp' attribute in the outgoing SDP.
[0] = Disable
[1] = Enable (default)
325
4. ini File Configuration
Description
May 2008