AudioCodes Mediant 1000 User Manual page 345

SIP User's Manual
ini File Parameter
TerminationSide_x
ClockMaster
ClockMaster_x
TDMBusClockSource
TDMBusPSTNAutoClock
Enable
TDMBusLocalReference
AutoClockTrunkPriority
TDMBusPSTNAutoClock
RevertingEnable
LineCode
LineCode_x
EnableCallingPartyCateg
ory
BChannelNegotiation
NFASGroupNumber_x
DChConfig_x
ISDNNFASInterfaceID_x
CASTableIndex_x
CASFileName_0
CASFileName_1
CASFileName_7
CASTablesNum
IdleABCDPattern
IdlePCMPattern
LineBuildOut.Loss
Version 5.4
Same as the description for parameter TerminationSide, but for a specific
trunk ID (x = 0 - 3).
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
Same as the description for parameter ClockMaster, but for a specific
trunk ID (x = 0 - 3).
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
Same as the description for parameter LineCode, but for a specific trunk
ID (x = 0 - 3).
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 235.
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 235.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with one or
more of the device trunks using the parameter CASTableIndex_x.
1 to 8. Indicates how many CAS protocol configurations files are loaded.
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
345
4. ini File Configuration
Description
May 2008