SIP User's Manual
3.4.2.5
Configuring the General Media Settings
The 'General Media Settings' page allows you to configure various media parameters.
To configure general media parameters, take these 4 steps:
Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
1.
General Media Settings page item).
Configure the general media parameters according to the table below.
2.
Click the Submit button to save your changes.
3.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230.
4.
Parameter
Max Echo Canceller Length
[MaxEchoCancellerLength]
Enable Continuity Tones
Version 5.6
Figure 3-44: General Media Settings Page
Table 3-17: Media Settings Parameters
Determines the maximum Echo Canceler Length (in msec),
which is the maximum echo path delay (tail length) for which the
echo canceller is designed to operate:
[0] Default = based on various internal device settings to
attain maximum channel capacity (default)
[11] 64 msec
[22] 128 msec
Notes:
Using 128 msec reduces the channel capacity to 200
channels.
Reset the device after modifying this parameter.
It isn't necessary to configure the parameter
EchoCancellerLength as it automatically acquires its value
from this parameter.
N/A.
79
3. Web-Based Management
Description
November 2008