Software; Cabling; Figure 14-1: Mediant 1000 Front Panel Osn Server Connections - AudioCodes Mediant 1000 User Manual

USB cable (not supplied) to connect the external USB CD ROM to the Mediant 1000
RS-232 cable (supplied)
Linux
TM
Blank CD or DVD media
Windows

14.1.2 Software

The software requirements include the following:
RS-232 console / terminal software (e.g., HyperTerminal
ISO Image Editor (WinISO
http://www.winiso.com/download.htmUNIX
http://www.pspad.comr
14.2

Cabling

The following procedure describes the cabling before installing Linux
the Mediant 1000 OSN Server.
To cable the OSN Server for installing the Linux
system, take these 4 steps:
1. On the Mediant 1000 CM module (located on the front panel), perform the following:
a. Connect the RS-232 port to a PC, using the RS-232 cable.
b. Connect the USB port to an external CD-ROM drive, using the USB cable.

Figure 14-1: Mediant 1000 Front Panel OSN Server Connections

2. On the Mediant 1000 iPMX module (located on the rear panel), connect the RJ-45
Ethernet port, using the Ethernet cable.
SIP User's Manual
Distributions Installation CDs
PC with CD RW or external CD ROM/RW
TM
is recommended -- refer to
TM
http://www.ultraedit.com
TM
File Format text editor (refer to
TM
524
Mediant 1000 & Mediant 600
)
operating system on
TM
operating
TM
Document #: LTRT-83303