Stopping The Playing Of An Announcement; Relevant Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
An example is shown below of an MSCML <PlayRecord> Response:
<?xml version="1.0" encoding="utf-8"?>
<MediaServerControl version="1.0">
text="OK" reclength="15005">
</MediaServerControl>

10.2.2.5 Stopping the Playing of an Announcement

The Application server issues a <stop> request when it requires that the device stops a
request in progress and not initiate another operation. The only (optional) request-specific
parameter is id.
The device refers to a SIP re-INVITE message with hold media (c=0.0.0.0) as an implicit
<Stop> request. The device immediately terminates the request in progress and sends a
response.
An example is shown below of an MSCML <Stop> Request:
<?xml version="1.0" encoding="utf-8"?>
<MediaServerControl version="1.0">
</MediaServerControl>

10.2.2.6 Relevant Parameters

The following parameters (described in ''Media Server Parameters'' on page 342) are used
to configure the MSCML:
AmsProfile = 1 (mandatory)
AASPackagesProfile = 3 (mandatory)
VoiceStreamUploadMethod = 1 (mandatory)
EnableVoiceStreaming = 1 (mandatory)
MSCMLID (default="ivr")
AmsPrimaryLanguage (default="eng")
AmsSecondaryLanguage (default="heb")
When using APS:
•
HeartBeatDestIP (refer to ''System Parameters'' on page
•
HeartBeatDestPort
•
HeartBeatIntervalmsec
When using AutoUpdate:
•
VPFileURL
•
APSSegmentsFileUrl
•
AutoUpdateFrequency / AutoUpdatePredefinedTime
Version 5.4
<response request="playrecord" id="75899" code="200"
</response>
<request>
<stop id="123">
</stop>
</request>
491
10. Media Server Capabilities
305 )
May 2008