4.
Using a tweezer-like tool (or small flathead screwdriver), carefully leverage the battery
out of the battery holder. Be careful not to touch other components on the board with
your tool.
Figure 12-11: Removing Lithium Battery from iPMX Module
5.
For installing the new battery, simply push the battery into the battery holder using
your fingers. Ensure that you install the battery in the correct orientation such that the
positive side is facing up (i.e., the side containing the battery description is visible).
6.
Re-insert the iPMX module into the slot of the Mediant 1000 chassis as described in
the previous section.
SIP User's Manual
508
Mediant 1000 & Mediant 600
Document #: LTRT-83303