Figure 3-109: Reset Confirmation Message Box; To Reset The Device - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To reset the device, take these 6 steps:
1. Open the 'Maintenance Actions' page (refer to ''Maintenance Actions'' on page 262).
2. Under the 'Reset Configuration' group, from the 'Burn To FLASH' drop-down list,
select one of the following options:
•
'Yes': The device's current configuration is saved (burned) to the flash memory
prior to reset (default).
•
'No': Resets the device without saving the current configuration to flash (discards
all unsaved modifications).
3. Under the 'Reset Configuration' group, from the 'Graceful Option' drop-down list,
select one of the following options:
•
'Yes': Reset starts only after the user-defined time in the 'Shutdown Timeout' field
(refer to Step 4) expires or after no more active traffic exists (the earliest thereof).
In addition, no new traffic is accepted.
•
'No': Reset starts regardless of traffic, and any existing traffic is terminated at
once.
4. In the 'Shutdown Timeout' field (relevant only if the 'Graceful Option' in the previous
step is set to 'Yes'), enter the time after which the device resets. Note that if no traffic
exists and the time has not yet expired, the device resets.
5. Click the Reset button; a confirmation message box appears, requesting you to
confirm.
6. Click OK to confirm device reset; if the parameter 'Graceful Option' is set to 'Yes' (in
Step 3), the reset is delayed and a screen displaying the number of remaining calls
and time is displayed. When the device begins to reset, a message appears notifying
you of this.
Notes:
Version 5.4

Figure 3-109: Reset Confirmation Message Box

•
Throughout the Web interface, parameters preceded by the lightning
symbol are not applied on-the-fly to the device and require that you reset
the device for them to take effect.
•
If you modify parameters that only take effect after a device reset, after
you click the Submit button, the toolbar displays the word 'Reset' (refer
to ''Toolbar'' on page 28) to remind you to later reset the device.
263
3. Web-Based Management
May 2008