Configuring The General Media Settings; Figure 3-44: Rtp/Rtcp Settings Page; Figure 3-45: General Media Settings Page - AudioCodes MP-124 User Manual
Cpe & access analog gateways
Hide thumbs
Also See for MP-124:
- User manual (486 pages) ,
- Hardware installation manual (44 pages) ,
- User manual (584 pages)
Table of Contents
Advertisement
SIP User's Manual
To configure the RTP/RTCP parameters:
1.
Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings page item).
2.
Configure the parameters as required.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
3.3.2.4
Configuring the General Media Settings
The 'General Media Settings' page allows you to configure various media parameters. For a
detailed description of the parameters appearing on this page, refer to "Configuration
Parameters Reference" on page 213.
To configure general media parameters:
1.
Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
General Media Settings page item).
2.
Configure the parameters as required.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
Version 5.8
Figure 3-44: RTP/RTCP Settings Page
Figure 3-45: General Media Settings Page
71
3. Web-Based Management
September 2009
- Quick Links:
- Accessing the Web Interface
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
