AudioCodes Mediant 1000 User Manual page 290

Column Name
Connectivity Status The status of the IP address' connectivity according to the method in the
'Connectivity Method' field.
Quality Status Determines the QoS (according to packet loss and delay) of the IP address.
Notes:
Quality Info. Displays QoS information: delay and packet loss, calculated according to
previous calls.
Notes:
DNS Status DNS status can be one of the following:
SIP User's Manual
OK = Remote side responds to periodic connectivity queries.
Lost = Remote side didn't respond for a short period.
Fail = Remote side doesn't respond.
Init = Connectivity queries not started (e.g., IP address not resolved).
Disable = The connectivity option is disabled, i.e., parameter 'Alt Routing Tel
to IP Mode' (AltRoutingTel2IPMode ini) is set to 'None' or 'QoS' (refer to
''Routing General Parameters'' on page 198).
Unknown = Recent quality information isn't available.
OK
Poor
This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
This parameter is reset if no QoS information is received for 2 minutes.
This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
This parameter is reset if no QoS information is received for 2 minutes.
DNS Disable
DNS Resolved
DNS Unresolved
Description
290
Mediant 1000 & Mediant 600
Document #: LTRT-83303