Configuring The Ip Routing Table; Table 3-12: Network Settings -- Nfs Settings Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual

Table 3-12: Network Settings -- NFS Settings Parameters

Parameter
Index
HostOrIP
RootPath
NFSVersion
AuthType
UID
GID
VLANType
3.4.1.5

Configuring the IP Routing Table

The 'IP Routing Table' page allows you to define up to 50 static IP routing rules for the
device. For example, you can define static routing rules for the OAMP and Control
networks since a default gateway is supported only for the Media traffic network (refer to
''Configuring the Multiple Interface Table'' on page 68). Before sending an IP packet, the
device searches this table for an entry that matches the requested destination host /
network. If such an entry is found, the device sends the packet to the indicated router. If no
explicit entry is found, the packet is sent to the default gateway (configured in the 'IP
Settings' page-- refer to ''Configuring the IP Settings'' on page 64).
Version 5.4
The row index of the remote file system.
The valid range is 0 to 4.
The domain name or IP address of the NFS server. If a domain name is
provided, a DNS server must be configured.
Path to the root of the remote file system in the format: /[path]. For
example, '/audio'.
NFS version used with the remote file system: 2 or 3 (default).
Authentication method used with the remote file system.
[0] Auth NULL.
[1] Auth UNIX (default).
User ID used in authentication when using Auth UNIX.
The valid range is 0 to 65537. The default is 0.
Group ID used in authentication when using Auth UNIX.
The valid range is 0 to 65537. The default is 1.
The VLAN type for accessing the remote file system.
[0] = OAMP.
[1] = Media (default).
Note: This parameter applies only if VLANs are enabled or if Multiple
IPs is configured (refer to ''VLANS and Multiple IPs'' on page 450).
75
3. Web-Based Management
Description
May 2008