Configuring The Application Settings; Figure 3-44: Application Settings Page - AudioCodes Mediant 1000 User Manual

SIP User's Manual
3.4.1.3

Configuring the Application Settings

The 'Application Settings' page is used for configuring various application parameters such
as Telnet.
To configure the Application settings parameters, take these 4
steps:
1. Open the 'Application Settings' page (Configuration tab > Network Settings menu >
Application Settings page item).
2. Configure the Applications parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
Version 5.4

Figure 3-44: Application Settings Page

71
3. Web-Based Management
May 2008