SIP User's Manual
3.
Use the cutter tool to remove the small metal strip between the upper and lower slots,
as shown in the figure below.
4.
Insert the iPMX module into the first slot, closest to the power connection, as shown in
the figure below.
5.
Push the iPMX module into the slot and press on it firmly to ensure it has been fully
inserted.
6.
Using a flathead screwdriver, tighten the module's two captive mounting screws
located on the bottom right and left corners.
7.
Using a Philips screwdriver, tighten the module's two Philips screws located on the top
right and left corners.
Version 5.4
Figure 12-8: Mediant 1000 with Cutter Tool
Figure 12-9: Inserting iPMX Module
505
12. OSN Server Hardware Installation
May 2008