Toolbar; Figure 3-3: "Reset" Displayed On Toolbar; Table 3-1: Description Of Toolbar Buttons - AudioCodes Mediant 1000 User Manual

3.3.1

Toolbar

The toolbar provides command buttons for quick-and-easy access to frequently required commands,
as described in the table below:
Icon Button Name
Submit
Burn
-- Device
Actions
Home
Help
Log off
Note:
SIP User's Manual

Table 3-1: Description of Toolbar Buttons

Applies parameter settings to the device (refer to ''Saving Configuration''
on page 265).
Note: This icon is grayed out when not applicable to the currently opened
page.
Saves parameter settings to flash memory (refer to ''Saving Configuration''
on page 265).
Opens a drop-down menu list with frequently needed commands:
Load Configuration File: opens the 'Configuration File' page for
loading an ini file (refer to ''Backing Up and Restoring Configuration'' on
page 276).
Save Configuration File: opens the 'Configuration File' page for
saving the ini file to a PC (refer to ''Backing Up and Restoring
Configuration'' on page 276).
Reset: opens the 'Maintenance Actions' page for resetting the device
(refer to ''Resetting the Device'' on page 262).
Software Upgrade Wizard: opens the 'Software Upgrade Wizard'
page for upgrading the device's software (refer to ''Software Upgrade
Wizard'' on page 272).
Opens the 'Home' page (refer to ''Using the Home Page'' on page 52).
Opens the Online Help topic of the currently opened configuration page in
the Work pane (refer to ''Getting Help'' on page 52).
Logs off a session with the Web interface (refer to ''Logging Off the Web
Interface'' on page 62).
If you modify parameters that take effect only after a device reset, after you
click the Submit button, the toolbar displays the word "Reset" (in red color),
as shown in the figure below. This is a reminder to later save ('burn') your
settings to flash memory and reset the device.

Figure 3-3: "Reset" Displayed on Toolbar

Description
28
Mediant 1000 & Mediant 600
Document #: LTRT-83303