SIP User's Manual
5.7.6
Configuring the General Media Settings
To configure the General Media Settings parameters, take these 4
steps:
1.
Open the 'General Media Settings' screen (Advanced Configuration menu > Media
Settings > General Media Settings option).
2.
Configure the General Media Settings according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
Table 5-42: Media Settings - General Media Settings Parameters
Parameter
Max Echo Canceller Length
[MaxEchoCancellerLength]
Enable Continuity Tones
Version 5.2
Figure 5-45: General Media Settings Screen
Maximum Echo Canceler Length in msec:
[0] Default = based on various internal gateway settings to
attain maximum channel capacity (default)
[11] 64 = 64 msec
[22] 128 = 128 msec
Notes:
Using 28 msecs reduces the channel capacity to 200
channels.
The gateway must be reset after the value of
MaxEchoCancellerLength is changed.
It isn't necessary to configure the parameter
EchoCancellerLength as it automatically acquires its value
from the parameter MaxEchoCancellerLength.
N/A.
205
5. Web-based Management
Description
September 2007