3.5.1.1
Configuring the Management Settings
The 'Management Settings' page allows you to configure the device's management
parameters.
To configure the Management parameters, take these 4 steps:
1.
Open the 'Management Settings' page (Management tab > Management
Configuration menu > Management Settings page item).
2.
Configure the Management Settings according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.
SIP User's Manual
Figure 3-102: Management Settings Page
254
Mediant 1000 & Mediant 600
Document #: LTRT-83303