EPSON TMNet WebConfig
EPSON TMNet WebConfig is a Utility to set the product on a web browser.
This section describes EPSON TMNet WebConfig using Internet Explorer as a browser.
Starting EPSON TMNet WebConfig
Follow the steps below to start up EPSON TMNet WebConfig.
1
Start up a PC connected to the network.
2
Start up the web browser, and input the following.
When SSL is disabled: http://[This product's IP address]/webconfig/
When SSL is enabled:
EPSON TMNet WebConfig starts.
Help Screen Display
Click [Help] to display the help screen for EPSON TMNet WebConfig.
Version Screen Display
Click [About] to display the version screen for EPSON TMNet WebConfig.
https://[This product's IP address]/webconfig/
For the product's IP address, see the status sheet. (U
sheet" on page
67)
A user name and a password will be required on the authentication screen. Enter
"epson" for both the user name and the password. You can change the password on
the [Password Setting] screen
Password" on page
115.).
Chapter 3
Application Development Information
"Confirming with a status
(U"Admin Settings - Administrator Information -
3
97