Adf Paper Passage - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 1.0 Jul. 2005

ADF Paper Passage

• The Paper Passage motion of the Automatic Document Feeder is checked.

1. Set the mode to the Service Mode.

2. Touch the [ADF] key.

3. Touch the [Paper Passage] key.

4. Select the Paper Passage Mode to be tested from [1-Sided (No Detect)], [1-Sided

(Mixed Org.)] and [2-Sided].

5. Set the Original in the Take-up Tray.

The Start key color changes from orange to green.

6. Press the Start key. The operation starts.

• After starting the operation by pressing the Start key, if the Start key is pressed

during the operation, the operation will be suspended. Then, if the Start key is

pressed again during the suspension, the operation will be resumed.

• If the Stop key is pressed during the test operation, the test will be forced to end.

• If there is no Original set in the Take-up Tray, the Start key will not work.

• All Originals set in the Take-up Tray are passed through. Upon the completion of

all Originals passed through, the Paper Through Test ends.

6. Service / Test Mode

4582F3E514DA

Table of Contents