Page, Delete
Purpose:
Use this command to delete a page.
Syntax:
s n
n is the numeric page ID. n values can range between 1 and 9.
Notes:
The default page (page 0) cannot be deleted.
Pitch Size, Set
Purpose:
In 4400 mode, this command can be used to set the pitch size which can define
the size of the characters in human-readable fields. When used, the height and
width magnification and point size are disabled.
Default:
n = 12
Syntax:
g n
n values can range between 1 and 50.
Notes:
This command can be used for both bitmap and outline fonts.
Point Size, Set
Purpose:
In 4400 mode, this command can be used to set the point size, which can define
the size of the characters in human-readable fields.
Default:
n = 12
Syntax:
k n
n values can range between 4 and 212.
Notes:
This command works most effectively on fonts c20, c21, c22, and c25.
The printer must be in 4400 (advanced) mode.
Print Line Dot Count Limit, Set
Purpose:
This is a null command and is ignored by the printer.
Syntax:
v n
NugFont
HelvC
C o d e 3 9
Printer Commands
7
7-59