User-Defined Character Field, Create Or Edit; User-Defined Font, Clear Or Define Bitmap - Intermec 4400 User Manual

User-Defined Character Field, Create or Edit

Purpose: Use this command to edit or create a graphic field n.
Default: n = 0
Syntax:
U n [, name ]
n values can range between 1 and 199.
,name is an optional field. The field can be up to eight ASCII characters, except
a semicolon.
Notes: Parameters for the default field:
Field origin
Field direction
Character rotation
UDC
Height magnification
Width magnification

User-Defined Font, Clear or Define Bitmap

Purpose: Use this command to clear or create a user-defined bitmap font set. n is the font
ID number.
Syntax:
T n [, name ]
Values for n can range from 3 to 6 and 8 to 19.
,name is an optional field. The field can be up to eight ASCII characters.
Notes: If font set n has already been defined, all previous characters in the font set are
erased. An existing font cannot be edited, only recreated. To change any
characters, the entire font set must be transmitted.
NugFont
HelvC
0,0
0 degrees
0 degrees
0
1
1
C o d e 3 9
Printer Commands
7
7-61